RELIABLE ENERGY SUPPLY AND NONPROLIFERATION

The phenomenon of global warming has led to a revival of the prospects for increased nuclear energy production worldwide, yet such increased production carries with it the increased risk of proliferation. To mitigate this risk, various multinational arrangements have been proposed to provide reliable supply of nuclear fuel while at the same time discouraging the construction of national plants for nuclear enrichment and reprocessing. This article provides a brief history of some of these proposals and concludes that the likelihood of success for such schemes as effective tools for nonproliferation is not high at this time. A proposal from the World Council on Renewable Energy to expand the understanding of supplier obligations under Article IV of the Treaty on the Non-Proliferation of Nuclear Weapons (NPT) to include the development of non-nuclear energy technologies for NPT parties in good standing is potentially a much better nonproliferation tool. Such an approach tracks the ideas contained in Title V of the Nuclear Non-Proliferation Act of 1978, which has recently received revived congressional interest.     

超声波辅助微波消解预处理测量污泥金属元素

以实验室污泥和污水厂污泥为研究对象,建立了超声波辅助微波消解预处理测量污泥金属元素的方法与程序。首先通过超声波分散污泥絮体,然后对污泥进行加热预处理和微波消除,最后采用火焰原子吸收法测量污泥中的金属元素。结果表明,150 W超声波作用于25 mL污泥3 min为超声波分散污泥的较优条件,能保证后续操作过程取样均匀。微波消解前适宜的加热预处理条件为90℃,20 min。实验室污泥微波消解的较优酸体系为2 mL双氧水＋4 mL反王水（或4 mL王水）;污水厂污泥微波消解的较优酸体系为1 mL氢氟酸＋2 mL双氧水＋4 mL王水,同时,第3阶段消解条件为压强2.0 MPa下消解20 min。超声波辅助微波消解预处理具有用酸量少、简易快捷、准确度和精密度高等优点,测量K,Ca,Mg,Fe的相对标准偏差≤2.75%,加标回收率为97.5%～102%。     

Optimization of resistance spot brazing process parameters in AHSS and AISI 304 stainless steel joint using filler metal

The aim of this research study was to determine optimal resistance spot brazing parameters for joining between AHSS and AISI 304 stainless steel by using filler metal. The key parameters investigated in this study consist of the brazing current, electrode pressure and brazing time. The Taguchi method was applied to the design of experiments. Signal-to-Noise ratio was introduced in the study to identify optimal levels from the process where input parameters yield increased shear strength. Brazing was thus implemented with 5,000A brazing current, 0.70 MPa electrode pressure, and 1.50s brazing time. The maximum shear strength obtained was 54.31 N·mm⁻² in accordance with input parameter settings. In addition, Cu-rich phase and Ag_0.4Fe_0.6 intermetallic phases were found at the interface zone.     

Effect of fusion welding processes on tensile properties of armor grade,high thickness,non-heat treatable aluminium alloy joints

AA5059 is one of the high strength armor grade aluminium alloy that finds its applications in the military vehicles due to the higher resistance against the armor piercing (AP) threats. This study aimed at finding the best suitable process among the fusion welding processes such as gas tungsten arc welding (GTAW) and gas metal arc welding (GMAW) by evaluating the tensile properties of AA5059 aluminium alloy joints. The fracture path was identified by mapping the low hardness distribution profile (LHDP) across the weld cross section under tensile loading. Optical and scanning electron microscopies were used to characterize the microstructural features of the welded joints at various zones. It is evident from the results that GTAW joints showed superior tensile properties compared to GMAW joints and this is primarily owing to the presence of finer grains in the weld metal zone (WMZ) and narrow heat-affected zone (HAZ). The lower heat input associated with the GTAW process effectively reduced the size of the WMZ and HAZ compared to GMAW process. Lower heat input of GTAW process results in faster cooling rate which hinders the grain growth and reduces the evaporation of magnesium in weld metal compared to GMAW joints. The fracture surface of GTAW joint consists of more dimples than GMAW joints which is an indication that the GTAW joint possess improved ductility than GMAW joint.     

“军民融合式”油料保障

文章探讨"军民融合式"油料保障的基本内涵,分析当前推行"军民融合式"油料保障面临的主要困难,从转变思想观念、健全法规体系、建立长效机制、优化资源配置、构建信息网络五个方面提出了建立"军民融合式"油料保障的对策措施。     

焊接切割与火灾

焊割火灾事故呈上升趋势。文章分析了焊割火灾爆炸危险性,并提出了预防措施。     

基于小波分析的柴油机燃油系统故障诊断研究

提出了一种基于小波变换的柴油机燃油系统故障诊断方法。利用夹持在高压油管上的传感器对高压油管外壁弹性变形进行检测,在12150L柴油机喷油泵实验台上进行了大量的实验,对测得的高压油管压力波形进行小波变换,提取反映燃油系统故障状态的特征向量,通过特征参数的变化能有效地诊断燃油系统的各种典型故障。     

神经网络在自行火炮发动机燃油系统故障诊断中的应用

在讨论神经网络快速算法的基础上,研究了自行火炮发动机燃油供给系统几种常见故障的诊断方法,并在发动机实际运行中进行试验,结果表明,神经网络的采用使诊断模型具有智能化特点,用于发动机故障诊断效果是明显的。     

油耗线法测定柴油机机械效率的理论分析

本文阐明了用油耗线法测定柴油机机械损失的理论依据,并指出该法所得结果为接近空载时的值.     

气动剥离液滴的附面层分析方法

本文根据附面层理论,对高速气流中的液滴,因气流和液滴表面相互作用而产生的气动剥离现象进行了分析,建立了气液两相附面层耦合问题的理论分析模型,得到了发生气动剥离时的最小气流速度的计算公式,为液体燃料在高速气流申雾化机理研究提供参考。